(Components list at bottom of page)

by: Stephanie Dixon

nstructions:

• On 2 feet of 20 gauge wire, centre  the button on the wire.
• Place the bead and wire together on the back of ring mandrel in the groove.
• Wrap each end of wire around the mandrel in opposite directions  (3-5 times around the mandrel.)
  
• Bring the wire up and start to create a nest under the button by wrapping the wire around the shank of the button. (One wire goes clockwise, the other goes counter clockwise - doesn't matter which one.)
  
• When you have about three inches left of wire left on each end, push the wire through the centre of the ring and wrap around the shank of the ring approximately 3 times (odd numbers are always better). Cut the wire closely and use your chain nose pliers to tuck in the end.

email to a friend

Components Clicking on components links will open a new window so that you don't lose this page.
		74701010-11 Craft Wire - 20ga - Brass (Tarnish Resistant) (Artistic Wire) (Or - any other colour of wire could be fun too!)	Price: $ 10.95 per	In Stock
	Qty: 1	s31597 Czech Glass Button - 23mm Swan a Swimming - White/Blue w Gold Accents	Price: $ 6.50 per	Sorry - this item is unavailable.